Whole-house repipe with new PEX lines in Payson AZ

Repiping Services in Payson, AZ | Whole-Home PEX & Copper Repipes

Whole-house PEX and copper repipes for Rim Country homes, replacing polybutylene and galvanized lines that keep springing leaks. When leaks show up in different rooms, a repipe beats another patch, and you get your written price before work starts.

One leak is a repair. A pattern is a repipe.

A single leak usually means a single repair. Leaks in different rooms, rusty water from hot and cold taps, and pressure that keeps dropping all over the house mean something else: the system itself is wearing out. Patching one spot after another costs money and still leaves the next weak spot in the wall.

A repipe replaces the failing supply lines, through the whole house or through the part that keeps failing, so the problem stops coming back. Rim Country Plumbing Co. repipes homes in Payson and the Rim Country towns with PEX and copper. You get a written price before work starts, the permit and inspection handled for your address, and a written plan that says what is included before we open a wall.

Call (928) 260-9425. If a pipe is leaking right now, call now. The emergency line is 24/7.

Signs your home needs repiping

  • Leaks in more than one place, not the same spot twice. One leak is a repair. Leaks in different rooms are a pattern.
  • Low pressure all over the house, not at one faucet. When every tap runs weak, the lines themselves are closing up.
  • Rusty or discolored water from hot and cold taps. Color from both sides points to the supply lines, not one fixture.
  • Visible corrosion, flaking, or green stains on copper pipe. What you can see is usually worse inside.
  • A pipe that freezes in the same place every winter. That spot will keep failing until the line is rerouted or replaced.
  • Your water meter moves when nothing is running, or wet ground shows up outside. Both can mean a supply line is leaking where you cannot see it.
  • Banging pipes, or water temperature that swings when someone flushes. Old, scaled, or loose lines cause both.

If two or more of these sound familiar, an inspection will tell you whether a repair, a partial repipe, or a whole-home repipe is the right call.

What kind of pipe do you have?

Galvanized steel.

Common in homes built before the 1970s. It rusts from the inside, so it can look fine outside while the flow inside keeps narrowing. Rust in the water and pressure that fades year by year are the usual signs.

Polybutylene.

Grey plastic pipe, often marked “PB”, installed in homes built from about 1978 to 1995. It reacts with chlorine in town water, turns brittle, and can fail without warning. Some insurers will not cover a home with polybutylene supply lines. If your home was built in that window, check the pipe material before you spend another dollar on leak repairs.

Copper.

Long-lived and proven, but it can develop pinhole leaks after years in hard water, and green staining on the surface is often the first sign. One pinhole is a repair. Pinholes in different places are a system problem.

Mixed systems.

Many older homes have several generations of pipe joined together. Transitions between materials have to be compatible and properly supported, or they become the next leak.

We do not guess from the age of the house. A quick inspection tells you what you have, and the written plan is built on that, not on a guess.

PEX vs copper in a Payson mountain home

Our standard repipe material is PEX, built for mountain-climate performance. Copper is still the right call for some runs. Here is how they compare for Payson:

FeaturePEXCopper
FreezingPEX expands under freezing pressure instead of cracking, a real advantage at Payson elevation. Not freeze-proof: exposed lines still need routing, insulation, and winter prep.Rigid. A hard freeze can crack it.
Hard waterPEX resists scale and pinhole corrosion.Hard water eats it thin over years, which is how pinholes start.
Outdoor runsPEX needs protection from UV.UV-resistant, well suited outdoors.
CostPEX lower material and labor cost, faster to install, fewer joints.Considerably more expensive in material and labor, especially on larger jobs.
WarrantyPEX pipe carries a 25-year manufacturer warranty (Uponor), which is transferable if you sell. Your written plan lists what is included and what it costs.Long proven life. Your written plan lists what is included and what it costs.

Plumber repiping a house in Payson AZ

Most Payson interior repipes we do are PEX. Copper still makes sense for outdoor runs and where you want it. Your written plan names the material and why, before work starts.

How a repipe works, step by step

  1. Inspection and written plan.

    We look at what you have, map the new routes, and put it in writing: material, days on site, water-off hours, what is included, and your price. No surprises, no obligation to proceed.

  2. Permit and inspection.

    Repipes commonly need a permit, and the inspection protects you when you sell. We handle the permit and inspection process with the Town of Payson or Gila County, whichever covers your address.

  3. Protection and access.

    Floors and walls are protected, then access cuts are opened, stud to stud where we can, to reach the old lines.

  4. New lines.

    The new supply lines go in, with a manifold where the layout fits, so fixtures can be shut off one at a time later.

  5. Pressure test before closing.

    The new system is pressure-tested and leak-checked before any wall is closed up.

  6. Inspection.

    Rough and final inspections happen as your jurisdiction requires.

  7. Patch, texture, paint, cleanup.

    Drywall patching and painting are either included or priced separately, and your written plan says which one before we open a wall. We clean up and walk the job with you at the end.

How long does it take?

A small home can take a day or two. A larger or two-storey home takes longer. Your written plan lists the days before work starts, not after.

Will my water be off the whole time?

No. Water is shut off in sections, not for days. Most homes have water back each evening, and the written plan lists the water-off hours before work starts, so you can plan cooking, bathrooms, and laundry around them.

Permits and inspections

Repipes commonly need a permit, and the inspection protects you when you sell. The exact rules depend on whether your home sits inside Town of Payson limits or in unincorporated Gila County, and we handle the permit and inspection process for your address either way.

Payson water and your pipes

Payson town water is hard, and that matters for old pipes. In 2025 the Town relied exclusively on groundwater wells, because runoff into C.C. Cragin reservoir was not enough to supply the town. That groundwater tested at 140 to 300 ppm hardness, which is hard to very hard. The minerals are not harmful to drink, but they leave white spots on fixtures, and inside old metal lines they build scale that narrows flow and speeds up deterioration.

Cragin surface water is soft, with a median hardness of 20 ppm, and the Town buffers it to prevent corrosion, but it was not the water Payson homes received in 2025. If your home runs on a private well, which is common in Star Valley, Pine, Strawberry, and outside Town water, the Town report does not cover you. Well hardness varies by well, so test first.

Hard water plus old pipe is the combination that ends in a repipe. PEX resists scale and pitting in a way metal pipe does not, which is one more reason it is our standard repipe material here.

Partial repipe or whole-home repipe?

A partial repipe fits a home with one bad branch, one room, one addition, or one spot that freezes every winter. A whole-home repipe fits a home with leaks in several places, pressure loss all over the house, galvanized lines throughout, or polybutylene throughout. A partial fix is not a long-term fix for polybutylene: the rest of it is the same age and the same material.

We only recommend a whole-home repipe when the evidence says so. The inspection, not the size of the job, decides.

What does repiping cost in Payson?

Here is the honest answer: no Payson plumber publishes a repipe price. We checked. So we are not going to dress up a Phoenix or national number as a Payson price. What those outside figures look like, for budgeting only:

  • A Phoenix firm publishes small homes at $4,500 to $7,000, average homes at $7,000 to $12,000, and large homes at $12,000 to $20,000. Those are Phoenix Valley ranges, not Payson prices.
  • A Tucson firm publishes a single-storey base of $12,995 and two-storey bases of $17,495 to $21,495, with drywall patching and paint extra there. Those are Tucson base scopes, not Payson prices.
  • National guides (Angi) put whole-home repiping at $1,500 to $15,000, averaging near $7,500. That is a national range, not an Arizona quote.

What moves your price is home size, bathroom count, storeys, slab or crawlspace, PEX or copper, access, and whether drywall patching and painting are in the scope. Larger jobs like repiping get a written price you can hold onto before we touch anything. No surprises, no obligation to proceed.

Call (928) 260-9425 for your written price.

Cabins, seasonal homes, and well-water homes

A repipe on a second home or a cabin needs a different plan than a repipe on the house you sleep in every night. Tell us if the home sits empty in winter. The written plan covers how exposed lines are protected, how the water-off schedule fits around your visits, and what gets checked when you reopen the home.

On a well, the plan also covers a hardness test first and a look at the pressure tank, because well pressure problems and a repipe are often found together. If you are away while the work happens, we keep you posted on the schedule and the inspection results as they come in.

Where we repipe

Payson, Pine, Star Valley, Christopher Creek, Tonto Village, and Strawberry. Repiping is a bigger job, so we schedule it by area. Call (928) 260-9425 to book your inspection.

One leak is a repair. A pattern is a repipe. If your home shows the signs on this page, call (928) 260-9425. You will get a written price before work starts, a permit and inspection handled for your address, and a written plan that says what is included before we open a wall. If a pipe is leaking right now, call now. The emergency line is 24/7.

Call (928) 260-9425

Frequently Asked Questions

How do I know if I need a whole-home repipe or just a repair?
One leak is a repair. Leaks in different rooms, pressure loss all over the house, and rusty water from hot and cold taps are a pattern, and a pattern means the system is wearing out. An inspection tells you whether a repair, a partial repipe, or a whole-home repipe is right.
Is PEX or copper better for a Payson home?
Our standard repipe material is PEX, built for mountain-climate performance. It expands under freezing pressure instead of cracking, resists scale and pinhole corrosion, and costs less to install. Copper is still right for outdoor runs, where it resists UV, and where you want it. PEX is not freeze-proof: exposed lines still need routing, insulation, and winter prep. Your written plan names the material and why.
How long does a repipe take?
A small home can take a day or two. A larger or two-storey home takes longer. Your written plan lists the days before work starts, not after.
Will you cut into my walls? Will you patch and paint?
Some wall and ceiling access is usually necessary, and the amount depends on your layout and the route. Drywall patching and painting are either included or priced separately, and your written plan says which one before we open a wall.
Will my water be off the whole time?
No. Water is shut off in sections, not for days. Most homes have water back each evening, and the written plan lists the water-off hours before work starts.
Do I need a permit for a repipe in Payson?
Repipes commonly need a permit, and the inspection protects you when you sell. The exact rules depend on whether your home is inside Town of Payson limits or in unincorporated Gila County. We handle the permit and inspection process for your address.
What is polybutylene, and should I worry about it?
Polybutylene is grey plastic pipe, often marked “PB”, installed in homes built from about 1978 to 1995. It reacts with chlorine in town water, turns brittle, and can fail without warning, and some insurers will not cover a home with it. An inspection confirms whether you have it. A partial fix is not a long-term fix for polybutylene.
How much does a repipe cost in Payson?
No Payson plumber publishes a repipe price, so there is no published Payson number to quote you. Phoenix and national guide ranges run roughly $4,500 to $20,000 depending on home size and material, but those are not Payson prices. Larger jobs like repiping get a written price you can hold onto before we touch anything.
I have a cabin, or well water. Does that change the repipe?
Yes, in the planning. Well hardness varies by well, so test first, and the plan covers your pressure tank too. For a second home, the plan covers how exposed lines are protected, how the water-off schedule fits around your visits, and what gets checked when you reopen.